AcSIR-NML

Under the AcSIR, CSIR-NML has initiated Ph.D programs in Materials and Metallurgical Engineering, broadly involving mineral processing, primary and secondary extraction processes from ores, secondary resources and wastes, energy efficient and environmentally friendly processes, advanced materials for functional applications, structural materials and alloys, automotive, nuclear, power, energy efficient materials and coatings, waste utilization, nondestructive evaluation, mechanical behavior of materials, surface engineering of various advanced alloys and materials, corrosion and prevention, metal forming, thermo-mechanical behavior, grain boundary engineering, iron and steel making, energy & environment in metallurgical industries etc.

S. No. Course Name Course Coordinator
1. Tools & Techniques of materials Characterization Dr. Jay Chakarborty
2. Advanced Metallurgical Thermodynamics Dr. D. Bandopadhyay
3. Kinetics of Metallurgical Processes Dr. M. Malathi
4. Introduction to Materials Dr. Arvind Sinha
5. Advanced Mathematics and Numerical Analysis Dr. Nilima Roy
6. Advance Mechanical Property Characterization Dr. S. Sivaprasad
7. Life Cycle Assessment By External Faculty
8. Coating Technology Dr. S. K. Mishra
9. Microstructural Engineering Dr. B. Ravi Kumar
10. Advanced Manufacturing Dr. K. L. Sahu
11. Advanced Materials Dr. R. K. Sahu
12. Mechanical Behaviour of Materials Dr. S. Sivaprasad
13. Principles of Physical Metallurgy Dr. Mainak Ghosh
14. Corrosion & Control Dr. S. K. Tiwari
15. Principles and Advances in Steel Making Dr. J. Pal
16. Mineral Processing Dr. R. K. Rath
17. Principles and Advances in Iron Making Dr. J. Pal
18. Advances in Non-Ferrous Metal Extraction Dr. D. Mishra
19. Waste Processing & Recycling Dr. T.C. Alex
20. Science Management Dr. S. K. Pal
21. Structural Integrity & Assessment Dr. S. Sivaprasad
22. Integrated Computational Material Engineering By External Faculty
23. Advanced Minerology Dr. M. K. Mohanta
24. Physical Metallurgy Of Steels Dr. S. K. Das

PhD in Engineering

(i)      A Master’s degree in Engineering or Technology following a four-year engineering/technology or 4/5 year science degree; or an integrated minimum-5-year M Tech degree; or equivalent.

AND

(ii)     At least one of the following

  1. Awarded a national-level fellowship (such as NET JRF) tenable at CSIR institutes
  2. Meeting all the conditions required for eligibility for the CSIR-SRF
  3. Meeting all the conditions for award of the INSPIRE fellowship (typically awarded to students ranked first in the University)
  4. Meeting all the conditions stipulated by AcSIR for Project Assistants to register for a PhD
  5. Meeting all the conditions stipulated by AcSIR for industry-sponsored* students.

Integrated Dual-Degree PhD (IDDP) Program in Engineering

(i)      A 4-year undergraduate degree in Engineering or Science (such as BE/BTech/BS), or a five year degree in Science (such as MSc), or equivalent.

AND

(ii)     At least one of the following

  1. Awarded a national-level fellowship (such as NET JRF) tenable at CSIR institutes
  2. Meeting all the conditions required for eligibility for the CSIR-GATE-JRF
  3. Meeting all the conditions for award of the INSPIRE fellowship (typically awarded to students ranked first in the University)
  4. Meeting all the conditions stipulated by AcSIR for Project Assistants to register for a PhD
  5. Meeting all the conditions stipulated by AcSIR for industry-sponsored* students.

* with endorsement from Industry, Academic or Research Institutes for required academic leave and financial support during program.

These are only minimum quality yardsticks of eligibility for consideration for admission and bear no relationship with financial assistance or scholarship. Any stipend, scholarship or financial source for study would be the sole responsibility of the student. AcSIR itself does not provide any such scholarship or have any rule in these matters.

Online Admission Portal

Admission portal for current session and forthcoming sessions.

http://130.211.247.107/acsir/online-admission/portal/acsir-online-adm-portal/index.php#/

S. No. Name of Student Name of Supervisor Enrollment No. Research Area
1. Ashok K Dr. G. K. Mandal 32EE14A31003 Analysis and Control of Slag Carryover during Steelmaking
2. Ammasi A Dr. J. Pal 32EE14A31002  
3. Aarti Kumari Dr. S. K. Sahu 32EE14A31001  
4. Saurabh Shekhar Dr. K. K. Sahu 32EE14A31005  
5. Rima Dey Dr. S. Tarafder 20EE13A31001 Multiaxial cyclic deformation in 304LN stainless steel
6. Henal Shah   20EE13A31002  
7. Nitin Gupta Dr. J. K. Sahu 20EE13A31003  
8. Charu Singh Dr. Raghuvir Singh 20EE13A31004  
9. Jabed Miadad Dr. B. Ravikumar 20EE13A31005  
10. Manashi Adhikary Dr. B. Ravikumar 20EE13A31007 Effect of Continuous Annealing Parameters on Properties of Dual Phase Steel
11. Vikas Singh Dr. S. K. Das 20EE13A31008 Mathematical Modeling and plant studies od steel flow and solidification phenomena in a high-speed slab caster
12. Dhirendra Prasad Dr. J. Pal 20EE13A31009  
13. Biraj Kumar Sahoo Dr. S. G. Chowdhury 32EE15A31003  
14. Minal Shah Dr. Swapan K. Das 32EE15A31002  
15. Snehashish Tripathy Dr. S. G. Chowdhury 32EE15A31001  
16. Krishna Kumar Dr. Manoj Kumar 32EE15A31007  
17. Premkumar M Dr. Rajat Kumar Roy 32EE15A31004  
18. Shivendra Sinha Dr. D. Mishra 32EE16A31004  
19. Rashmi Singla Dr. Sanjay Kumar 32EE16A31005  
20. Chandraveer Singh Dr. J. Swaminathan 32EE16A31006  
21. Avanish Kumar Chandan Dr. Mainak Ghosh 32EE16A31002  
22. Gaurav Kumar Bansal Dr. S. G. Chowdhury 32EE16A31003  
23. Dilip Makhija Dr. R. K. Rath 20EE14A31003  
24. E. Z. Chacko Dr. Sarmishtha Palit Sagar 20EE14A31005  
25. Arijit Das Dr. Ratnakar Singh 20EE14A31004  
26. Rajesh Kumar Rai Dr. J. K. Sahu 20EE14A31001 Micro-mechanisms of high temperature deformation of a directionally solidified nickel base superalloy
27. Ram Bachchan Kumar Dr. M. Malathi 20EE15A31001  
28. Balakrishnan V Dr. Manoj Kumar 20EE15A31002  
29. Prashant Dixit Dr. R. K. Rath 20EE15A31003  
30. Nemai Chandra Gorain Dr. B. Ravikumar 20EE15A31004  
31. G. Senthil Kumar Dr. Krishnendu Mukherjee 20EE16J31001  
32. Sundara Bharthy Dr. M. Ghosh 20EE16J31002  
33. Ravindra Kumar Jha   20EE16A31002  
34. Vivek Dr. Suman K. Mishra 20EE16A31003  
35. MBN Raju Dr. K. Gopalakrishna 20EE16A31004  
36. Ajit Kumar Thakur Dr. S. Sivaprasad 20EE16A31005  
37. Ashutosh Bhushan Dr. Sanchita Chakravarty 20EE16A31006  
38. Anil Kumar Dr. Dayanand Paswan 20EE16A31007  
39. Niranjan Behera   20EE17A31005  
40. Santosh Kumar   20EE17A31002  
41. Goutam Kumar Raut   20EE17A31001  
42. Modassir Akhtar   20EE17A31003  
43. Bhupendra Kumhare   20EE18A31009  
44. Komal Singh   20EE18A31001  
45. Shivam Kumar   20EE18A31003  
46. Manish Kumar Nayak   20EE18A31002  
47. P. S. Manoranjan Jena   32EE18A31004  
48. Santosh Kumar Choudhary   32EE18A31006  
49. Md. Sameer Ansari   32EE18A31007  
50. Shubhada Kar   32EE18A31008  

 

Sl. No. Name of the Student Name of Supervisor Year of Completion Thesis Title Current Affiliation
1. Ganesh Chalavadi Dr. Ratnakar Singh 2015 Study of particle stratification in vibration and air fluidization assisted beneficiation of coal National Metallurgical Laboratory
2. Y.N. Singhbabu Dr. Ranjan Kumar Sahu 2016 Synthesis and evaluation of graphene oxide from different carbon sources towards electrical and corrosion properties  
3. Randhir Kumar Singh Dr. Jitendra Kumar Sahu 2017 Cyclic Deformation Behaviour of Advanced Ultra Super Critical (A-USC) Boiler Grade Nickel Base Superalloy IN 740H Indira Gandhi Institute of Technology(IGIT)
4. B Sivakumar Dr. Lokesh Chandra Pathak 2017 Surface Modification of Titanium Based Biomaterial to Improve the Tribocorrosion Behavior IIT-Madras
5. Y. Rajshekar Dr. Jagannath Pal 2018 Development of Blast Furnace Grade Hematite Ore Pellet with Iron Ore Slime and Mill Scale Additives Tata Steel

 

For details please contact

.

Dr. Jitendra Kumar Sahu
Coordinator, AcSIR-NML
CSIR-National Metallurgical Laboratory
Jamshedpur- 831007

.

Phone: 91-657-2345194

.

Email: coordinator.nml@acsir.res.in

.

Visit: http://www.nmlindia.org

S. No. Course Name L T P C
1. Tools & Techniques of Materials Characterization 3 0 2 4
2. Advanced Metallurgical Thermodynamics 3 0 0 3
3. Kinetics of Metallurgical Processes 3 0 0 3
4. Introduction to Materials 3 0 0 3
5. Advanced Mathematics and Numerical Analysis 3 0 0 3
6. Advance Mechanical Property Characterization 3 0 2 4
7. Life Cycle Assessment 2 2 0 4
8. Coating Technology 3 0 2 4
9. Microstructural Engineering 2 1 2 4
10. Advanced Manufacturing 2 0 2 3
11. Advanced Materials 3 0 0 3
12. Mechanical Behaviour of Materials 2 0 2 3
13. Principles of Physical Metallurgy 2 0 2 3
14. Corrosion & Control 2 0 2 3
15. Principles and Advances in Steel Making 3 0 0 3
16. Mineral Processing 2 0 2 3
17. Principles and Advances in Iron Making 3 0 0 3
18. Advances in Non-Ferrous Metal Extraction 2 0 2 3
19. Waste Processing & Recycling 2 0 2 3
20. Science Management 3 1 0 4
21. Structural Integrity & Assessment 2 2 0 4
22. Integrated Computational Material Engineering 3 1 0 4
23 Advanced Minerology 3 0 2 4
24. Physical Metallurgy Of Steels 3 0 2 4

 

Photo Gallery